Which ceiling materials should be selected

1. Ceiling material Gypsum board: Gypsum ceiling is made of gypsum plaster as the main raw material, mixed with additives and fibers. It has the characteristics of light weight, heat insulation, sound absorption, flame retardant, and can be sawn. Generally, 600600 specifications are used, which are divided into open bones and hidden bones. The keel is usually made of aluminum or iron. It can be used in living room, bedroom, study and other areas. 2. Ceiling material Light steel keel gypsum board: The gypsum board is combined with light steel keel to form light steel keel gypsum board. There are many types of light steel keel gypsum board ceilings, including paper gypsum board, gypsum board, fiber gypsum board, hollow gypsum board, etc. At present, light steel keel gypsum board ceilings are used more as partition walls, but less used as molding ceilings. 3. Plywood for ceiling materials: Plywood (also known as plywood) has the advantages of light material, high strength, good elasticity and toughness, resistance to shock and vibration, easy processing and finishing, and insulation. It can also easily create curved, round, square and other shapes of ceilings, but the disadvantage is that it is afraid of termites. 4. Special-shaped long aluminum gusset ceiling material: Now, this material is no longer used in most home decoration, mainly because it is not resistant to dirt and easily deformed. Square painted aluminum buckle ceilings are the current mainstream products used in kitchens, bathrooms and other places that are easy to get dirty and wet. ----Aluminum curtain wall panel manufacturers

   
   

5. Stained glass ceiling material: This ceiling has a variety of graphics and patterns. Lighting equipment can be installed inside, but it is generally only used for local decoration. If using light steel keel gypsum board ceiling or plywood ceiling for decoration, when painting the surface, seal the joints with gypsum powder, then seal with kraft paper before doing the primer and painting. 6. Nine centimeters board ceiling material: Nine centimeters board is a kind of plywood. Nine centimeters board refers to the thickness of the board, which is 9 mm. The nine-centimeter board is machine-pressed, so the surface is relatively flat. The panel is made of lacquer or plastic aluminum plate, which is generally used in the corridor of the office. 7. Plastic steel plate for ceiling material: The new type of plastic steel plate ceiling is stronger than the previous PVC plate. Although the price is high, the materials and patterns are various. 8. Ceiling material PVC board: PVC ceiling and PVC board have various colors and patterns, but most of them are plain, and there are also imitation patterns and marbles. Its cross section is a honeycomb mesh structure with machined notches and mortise on both sides. -----Aluminum ceiling manufacturers