Aluminum ceiling manufacturers share the installation method of aluminum ceiling

Installation method of aluminum ceiling: 1. Install aluminum corners at the same level. 2. The boom and light steel keel should be hoisted at appropriate intervals. The spacing between booms should be less than or equal to 1.2m, and the spacing between light steel keels should be 1.2m. 3. Connect the hanger pre-installed on the triangular keel with the triangular keel and light steel keel vertically according to the plate spacing, and then adjust the level. 4. Press the two sides of the square plate into the triangular keel joint in parallel. Install the square plate first, then find right angles at both ends of the horizontal direction, and then pull a straight line to gradually buckle the plates. Adjust once after each row to ensure that the board surface is flat and the board joints are vertical. (Note that the direction of the small hole on the edge of the square plate is to insert the triangle keel seam) 5. Wear gloves when fixing the plate. If you accidentally leave stains on the layout, please wash it with clean water. Do not remove the protective film during installation. 6. The purchased aluminum ceiling and its supporting keel and accessories should meet the product quality requirements and have no bending deformation. 7. In the process of transportation and stacking, the aluminum ceiling should be flat and no pressure to avoid the erosion of high temperature and harmful substances. 8. The keel should be installed smoothly, and the spacing deviation should be controlled within the allowable range of 1.5m. ----Aluminum curtain wall panel manufacturers

9. When installing the aluminum ceiling, if there is a size deviation, it should be adjusted first and then inserted in sequence. Hard insertion is not allowed to prevent deformation. 10. Objects such as large lamps and exhaust fans should be fixed with keels alone, and should not be placed directly on the aluminum ceiling. Precautions for aluminum ceiling installation: 1. The purchased aluminum ceiling and its supporting keels and accessories should meet the product quality requirements and have no bending deformation. Pay attention when purchasing ceiling decoration materials. 2. In the process of transportation and stacking, the aluminum ceiling should be laid flat without pressure to avoid the erosion of high temperature and harmful substances, otherwise it will naturally affect the smoothness of subsequent ceiling installation. 3. The keel is installed smoothly, and the spacing deviation is controlled within the allowable range of 1.5m. Therefore, the installation personnel are generally required to install, so as to ensure the installation quality. 4. When installing the aluminum ceiling, if there is a size deviation, it should be adjusted first and then inserted in sequence. Hard insertion is not allowed to prevent deformation. 5. Install aluminum ceilings in kitchens or bathrooms. Large lamps, exhaust fans and other objects should be fixed with keels alone, and should not be placed directly on the aluminum ceilings. ----Aluminum ceiling manufacturers